CVI3 Vision V 1.3.2.0

2 - GETTING STARTED

2.1 - Front panel

Legend
1 Report LEDs
2 Touchscreen color display
3 On/Off switch
4 Dedicated CVIPC Ethernet port + USB port

LED color	Designation	Action
Green	Accept report	-
Yellow	Incomplete rundown	Tighten again
Red & Yellow	Reject rundown	Loosen & Tighten again
Red	Above High Angle	Remove and replace fastener

2.2 - Bottom panel

No.	Description
1	Ethernet port dedicated only to CVIPC
2	USB port for data transfer/frmware updating/access control management
3	ePOD port for controller backup, memory extension, customer features activation

Refer to "APPENDIX - CVI3 CONNECTIONS"
to get more information about connections
schematics.

2.3 - Dimensions

2.4 - On receiving the controller

Check the following items are included in the kit supplied with the controller

Legend
1 Safety booklet
2 Quick start user manual
3 CDROM
4 2 cable clamps

Check the line voltage and power are compatible with your appliance: 85–125VAC/180–265VAC single phase with automatic switching voltage between 110 and 230 VAC. Frequency is 50/60 Hz.
Check the Quick Stop contact (pin J17-4) is correctly wired on the I/O connector: it can be a strap between pin J17-4 and J17-2 or a connection to a PLC or a push-button

The opening of the Quick Stop contact disables the power circuit.

• Switch on the GFI (see 1 hereafter)
• Connect the tool.
• Connect the power supply cable on the mains (2)
• Press the On/Off switch on the front panel to power on the controller

The front panel LEDs are blinking and the screen to select the
language is displayed:

Select your language by tapping the screen or the arrows.
Tap the "Save" icon on the bottom right to save and quit the screen.

3 - TREE VIEW

3.1 - Main menu/Confguration

3.2 - Main menu/Maintenance

4 - CONTROLLER SETTING

4.1 - Using icons

4.2 - Language

Path: Main menu/Confguration/Controller/User interface

Select another language.
Tap the "Save" icon on the bottom right to save and quit the screen

4.3 - Display

Path: Main menu/Confguration/Controller/User interface

Select torque and speed units:

- Torque Nm/ft.lb/in.lb/Kg.m/Kg.cm/oz.in
- Speed rpm/%

Tick "Keypad beep enabled" if required.
Tick "Backlight auto off": the screen will be automatically turned off after the timeout and turned on when the screen is touched.
Select the screen "Back light timeout" from 1 to 59 min. (15 by default)
Tap the "Save" icon to save and quit the screen

4.4 - Date & time

Path: Main menu/Confguration/Controller/User interface

Tap the current date and time to display the time keyboard.
Select year/month/day and time.
Select " Date/time syn source" to select the source of date/ time synchronization.
Tap the "Save" icon to save and quit the screen.

4.5 - Access manager

Path: Main menu/Confguration/Controller

It is recommended to protect the controller parameters against hazardous changes.

Plug in a USB key on the front panel port with suffcient access rights to turn on / off the "Access control". When the key is unplugged, the access to the programming screens is locked.
Return to the controller screen and select "Enable Access Manager" if you want the user to display the screens without modifying them.
Tick "Lock screen enabled" to lock the screen in Monitoring views. The icon "Screen locked" will be then displayed.